TS-439 Pro - RAID5 does not start rebuild

System & Disk Volume Management

TS-439 Pro - RAID5 does not start rebuild I started with 4 x SAMSUNG HD501LJ CR10 (500 Gb) configured in RAID5; I followed the procedure to expand the RAID. I removed the first disk, replaced with a bigger one (SAMSUNG HD103SI 1AG0 1 Tb) with an empty partition table. The QNAP log says "Drive 1 plugged in.", the new disk is available in Disk managemet>Volumne management, the SMART tests are GOOD, but the RAID rebiuld ... more ...Statistics : 2 Post || 64 Views Post by lrosa